پوشش و کف پوش مقاوم کننده سطوح بتنی در برابر سایش ، عوامل شیمیایی ، روغن و ...
ISONEM EP is a two-component solvent based epoxy primer with high chemical resistance.
•On steel or concrete. •Reservoir coatings. •Bund linings. •Food production areas. •Clean room floors and walls. •Pipe linings. •Metal tank
coating and lining. •Nuclear industries. •Process areas.
•Excellent decontaminability. •High film thickness. •Excellent chemical resistance. •Good abrasion resistance. •Durable. •Sprayable.
POT LIFE: +10° +20°C +30°C
60 mins 50 mins 40 mins
The surfaces must be dry and free of all contaminants eg oils, grease, surface treatments and coatings etc. The substrate must be prepared mechanically to achieve an open textured fine gripping surface, free of cement laitance. Weak concrete should be removed and surface defects such as blowholes and voids must be fully exposed. All dust, loose and friable material must be completely removed from all surfaces before application of the coating preferably by brush and vacuum. Repairs to cementitious substrate and filling of blowholes levelling of irregularities etc should be carried out using ISONEM M03 Repair Mortar.
MIXING: Mix both components thoroughly with a low speed electric stirrer (300-600 rpm) for a minimum of 3 minutes until a uniform mix has been achieved. Leave material to stand in container until the majority of air bubbles have dispersed.
APPLICATION: Apply by brush, roller or airless spray.
CLEANING EQUIPMENT: Hardened material may have to be mechanically removed.
A Component (Resin): 4 kg + B Component (Hardener) = 2 kg
TOTAL: 6 kg set.
2 CONSUMPTION: Approx 0.250 - 0.4 kg/m
STORAGE AND SHELF LIFE: Minimum 1 year in cool and dry places, unopened packages